{"title":"Gas Spring Accessories","description":"\u003cp\u003eFind gas spring accessories for mounting, connecting and adapting systems used in vehicles, machinery, technical furniture and industrial applications. This collection brings together end fittings for different diameters, threads and installation layouts.\u003c\/p\u003e\u003cp\u003eIt includes ball cups and ball studs, rod ends, eyelets, clevises with pins, flat and angled brackets, rod extensions, bushes, clips, release heads and protective tubes. Options are available in steel, stainless steel and plastic materials to suit different load, corrosion-resistance and mounting requirements.\u003c\/p\u003e\u003cp\u003eBefore choosing an accessory, check the ball or pin diameter, thread — such as M6, M8 or M10 — centre distance, thickness and bracket orientation. Correct dimensional compatibility is essential for the gas spring to operate properly and to avoid side loads. If you need help identifying the right combination, send us the SKU or the dimensions of the gas spring and mounting points.\u003c\/p\u003e","products":[{"product_id":"safety-kit-8-18","title":"Safety kit for 8\/18 gas springs","description":"\u003cp\u003eSafety kit for 8\/18 series gas springs. It covers the K175–K375 range, that is, springs from 175 to 375 mm extended length.\u003c\/p\u003e\u003cp\u003eIt retains the joint between the rod and its end fitting: it stops the ball socket coming apart through vibration or at the end of travel, which is when a lid drops without warning.\u003c\/p\u003e\u003cp\u003eIt fits over ball cups already installed, with no special tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 8\/18 · \u003cstrong\u003eRange:\u003c\/strong\u003e K175–K375\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"EXTENDED LENGTH OF YOUR STRUT: 175-375MM","offer_id":58169340297548,"sku":"KS142-18","price":17.21,"currency_code":"EUR","in_stock":true},{"title":"EXTENDED LENGTH OF YOUR STRUT: 385-575MM","offer_id":58169340330316,"sku":"KS242-18","price":20.27,"currency_code":"EUR","in_stock":true},{"title":"EXTENDED LENGTH OF YOUR STRUT: 585-800MM","offer_id":58169340363084,"sku":"KS356-18","price":22.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/SafetyKit_8-18.png?v=1786549403"},{"product_id":"safety-kit-10-22","title":"Safety kit for 10\/22 gas springs","description":"\u003cp\u003eSafety kit for 10\/22 series gas springs. It covers the K250–K405 range, that is, springs from 250 to 405 mm extended length.\u003c\/p\u003e\u003cp\u003eIt retains the joint between the rod and its end fitting: it stops the ball socket coming apart through vibration or at the end of travel, which is when a lid drops without warning.\u003c\/p\u003e\u003cp\u003eIt fits over ball cups already installed, with no special tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 10\/22 · \u003cstrong\u003eRange:\u003c\/strong\u003e K250–K405\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"EXTENDED LENGTH OF YOUR STRUT: 250-405MM","offer_id":58169340395852,"sku":"KS152-22","price":0.0,"currency_code":"EUR","in_stock":false},{"title":"EXTENDED LENGTH OF YOUR STRUT: 430-595MM","offer_id":58169340428620,"sku":"KS252-22","price":23.33,"currency_code":"EUR","in_stock":true},{"title":"EXTENDED LENGTH OF YOUR STRUT: 620-795MM","offer_id":58169340461388,"sku":"KS352-22","price":25.72,"currency_code":"EUR","in_stock":true},{"title":"EXTENDED LENGTH OF YOUR STRUT: 816-1035MM","offer_id":58169340494156,"sku":"KS467-22","price":32.63,"currency_code":"EUR","in_stock":true},{"title":"EXTENDED LENGTH OF YOUR STRUT: 1100-1200MM","offer_id":58169340526924,"sku":"KS552-22","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/SafetyKit_10-22.png?v=1786549433"},{"product_id":"gromet-to-suit-14-28","title":"Bush for 14\/28 mm protective tube","description":"\u003cp\u003eBush for the 14\/28 series protective tube.\u003c\/p\u003e\u003cp\u003eIt is the part that finishes the protective tube at its ends: it centres the tube on the spring and closes off the tube mouth, which is otherwise left open to dirt.\u003c\/p\u003e\u003cp\u003eIt pairs with the 28 mm protective tube of the same series. Check the series of your spring before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 14\/28 · \u003cstrong\u003eFor tube:\u003c\/strong\u003e 28 mm\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169344622924,"sku":"KGR1428","price":8.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/kgr1022_8b88c5ed-a81c-4e8f-b1fe-234b5750c3fe.png?v=1786463484"},{"product_id":"gromet-to-suit-8-18","title":"Bush for 8\/18 mm protective tube","description":"\u003cp\u003eBush for the 8\/18 series protective tube.\u003c\/p\u003e\u003cp\u003eIt is the part that finishes the protective tube at its ends: it centres the tube on the spring and closes off the tube mouth, which is otherwise left open to dirt.\u003c\/p\u003e\u003cp\u003eIt pairs with the 18 mm protective tube of the same series. Check the series of your spring before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 8\/18 · \u003cstrong\u003eFor tube:\u003c\/strong\u003e 18 mm\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169344655692,"sku":"KGR0818","price":2.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/kgr1022_e9465988-c0bf-4b74-868d-f8751115ce2a.png?v=1786463468"},{"product_id":"eyelet-6-1mm-dia-34mm-cent-5mm-thk-m6","title":"Eyelet, 6.1 mm diameter, 34 mm centre, 5 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 6.1 mm bore, 34 mm centre distance, 5 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 6.1 mm bore sets the pin diameter; the 34 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 5 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 6.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 34 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 5 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169344721228,"sku":"KEMT1X6","price":5.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/KEMT1x5_9c5e55d2-b04f-498f-8727-6cbada4b036b.png?v=1786445624"},{"product_id":"eyelet-8-1mm-dia-18mm-cent-3mm-thk-m6","title":"Eyelet, 8.1 mm diameter, 18 mm centre, 3 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 8.1 mm bore, 18 mm centre distance, 3 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8.1 mm bore sets the pin diameter; the 18 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 3 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 3 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345016140,"sku":"KEMT1X5","price":4.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/KEMT1x5.png?v=1786445598"},{"product_id":"extension-14mm-dia-30mm-long-m10","title":"Rod extension, 14 mm diameter, 30 mm length, M10 × 1.5 thread","description":"\u003cp\u003eRod extension, 14 mm diameter, adding 30 mm of length to the assembly, with M10 × 1.5 thread.\u003c\/p\u003e\u003cp\u003eIt screws in between the gas spring rod and its end fitting to move the anchor point without replacing the spring. This is the part to reach for when the spring gives the right force but falls short on usable stroke, or when the target bracket has ended up offset from the intended mounting.\u003c\/p\u003e\u003cp\u003eBy diameter and thread it belongs to the 14\/28 gas spring series. Before ordering, check three things on your spring: 14 mm rod diameter, M10 × 1.5 thread, and that the extra 30 mm fit in the mounting gap with the spring compressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 14 mm · \u003cstrong\u003eAdded length:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10 × 1.5 · \u003cstrong\u003eSeries:\u003c\/strong\u003e 14\/28\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345081676,"sku":"EXT1430M10","price":9.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/ext1430.png?v=1786605721"},{"product_id":"extension-10mm-dia-30mm-long-m8","title":"Rod extension, 10 mm diameter, 30 mm length, M8 × 1.25 thread","description":"\u003cp\u003eRod extension, 10 mm diameter, adding 30 mm of length to the assembly, with M8 × 1.25 thread.\u003c\/p\u003e\u003cp\u003eIt screws in between the gas spring rod and its end fitting to move the anchor point without replacing the spring. This is the part to reach for when the spring gives the right force but falls short on usable stroke, or when the target bracket has ended up offset from the intended mounting.\u003c\/p\u003e\u003cp\u003eBy diameter and thread it belongs to the 10\/22 gas spring series. Before ordering, check three things on your spring: 10 mm rod diameter, M8 × 1.25 thread, and that the extra 30 mm fit in the mounting gap with the spring compressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eAdded length:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8 × 1.25 · \u003cstrong\u003eSeries:\u003c\/strong\u003e 10\/22\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345147212,"sku":"EXT1030M8","price":5.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/EXT1030M8.png?v=1786445536"},{"product_id":"poly-prop-tube-28mm-1-mtr-length","title":"Polypropylene protective tube, 28 mm diameter, 1 m length","description":"\u003cp\u003ePolypropylene protective tube, 28 mm diameter and 1 m long, for 14\/28 series assemblies.\u003c\/p\u003e\u003cp\u003eIt fits over the gas spring and shields it from the outside: it stops grit, mud or a side knock from marking the cylinder and rod, which is where the dirt that scores the seal gets in.\u003c\/p\u003e\u003cp\u003eThe 28 mm matches the cylinder diameter of the 14\/28 series. It comes as a 1 m length to cut to size; the ends are finished with the bush for the same series, ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 28 mm · \u003cstrong\u003eLength:\u003c\/strong\u003e 1 m · \u003cstrong\u003eSeries:\u003c\/strong\u003e 14\/28 · \u003cstrong\u003eMaterial:\u003c\/strong\u003e polypropylene\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345737036,"sku":"KPT1428-1M","price":42.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/Tuboprotectordepolipropileno_71e0a395-7046-4cb1-ab22-de9e50904472.png?v=1786549524"},{"product_id":"poly-prop-tube-22mm-1-mtr-length","title":"Polypropylene protective tube, 22 mm diameter, 1 m length","description":"\u003cp\u003ePolypropylene protective tube, 22 mm diameter and 1 m long, for 10\/22 series assemblies.\u003c\/p\u003e\u003cp\u003eIt fits over the gas spring and shields it from the outside: it stops grit, mud or a side knock from marking the cylinder and rod, which is where the dirt that scores the seal gets in.\u003c\/p\u003e\u003cp\u003eThe 22 mm matches the cylinder diameter of the 10\/22 series. It comes as a 1 m length to cut to size; the ends are finished with the bush for the same series, ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 22 mm · \u003cstrong\u003eLength:\u003c\/strong\u003e 1 m · \u003cstrong\u003eSeries:\u003c\/strong\u003e 10\/22 · \u003cstrong\u003eMaterial:\u003c\/strong\u003e polypropylene\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345769804,"sku":"KPT1022-1M","price":26.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/Tuboprotectordepolipropileno_0834d4af-808c-4067-9c22-758cb28557db.png?v=1786549510"},{"product_id":"poly-prop-tube-18mm-1-mtr-length","title":"Polypropylene protective tube, 18 mm diameter, 1 m length","description":"\u003cp\u003ePolypropylene protective tube, 18 mm diameter and 1 m long, for 8\/18 series assemblies.\u003c\/p\u003e\u003cp\u003eIt fits over the gas spring and shields it from the outside: it stops grit, mud or a side knock from marking the cylinder and rod, which is where the dirt that scores the seal gets in.\u003c\/p\u003e\u003cp\u003eThe 18 mm matches the cylinder diameter of the 8\/18 series. It comes as a 1 m length to cut to size; the ends are finished with the bush for the same series, ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eLength:\u003c\/strong\u003e 1 m · \u003cstrong\u003eSeries:\u003c\/strong\u003e 8\/18 · \u003cstrong\u003eMaterial:\u003c\/strong\u003e polypropylene\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345802572,"sku":"KPT0818-1M","price":39.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/Tuboprotectordepolipropileno.png?v=1786549489"},{"product_id":"gromet-to-suit-10-22","title":"Bush for 10\/22 mm protective tube","description":"\u003cp\u003eBush for the 10\/22 series protective tube.\u003c\/p\u003e\u003cp\u003eIt is the part that finishes the protective tube at its ends: it centres the tube on the spring and closes off the tube mouth, which is otherwise left open to dirt.\u003c\/p\u003e\u003cp\u003eIt pairs with the 22 mm protective tube of the same series. Check the series of your spring before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 10\/22 · \u003cstrong\u003eFor tube:\u003c\/strong\u003e 22 mm\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169345835340,"sku":"KGR1022","price":9.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/kgr1022.png?v=1786461200"},{"product_id":"extension-14mm-dia-50mm-long-m10","title":"Rod extension, 14 mm diameter, 50 mm length, M10 × 1.5 thread","description":"\u003cp\u003eRod extension, 14 mm diameter, adding 50 mm of length to the assembly, with M10 × 1.5 thread.\u003c\/p\u003e\u003cp\u003eIt screws in between the gas spring rod and its end fitting to move the anchor point without replacing the spring. This is the part to reach for when the spring gives the right force but falls short on usable stroke, or when the target bracket has ended up offset from the intended mounting.\u003c\/p\u003e\u003cp\u003eBy diameter and thread it belongs to the 14\/28 gas spring series. Before ordering, check three things on your spring: 14 mm rod diameter, M10 × 1.5 thread, and that the extra 50 mm fit in the mounting gap with the spring compressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 14 mm · \u003cstrong\u003eAdded length:\u003c\/strong\u003e 50 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10 × 1.5 · \u003cstrong\u003eSeries:\u003c\/strong\u003e 14\/28\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169346228556,"sku":"EXT1450M10","price":9.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/ext1450.png?v=1786605754"},{"product_id":"eyelet-10mm-dia-21mm-cent-10mm-thk-m8","title":"Eyelet, 10 mm diameter, 21 mm centre, 10 mm thick, M8 thread","description":"\u003cp\u003eEyelet with a 10 mm bore, 21 mm centre distance, 10 mm thickness and M8 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 10 mm bore sets the pin diameter; the 21 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M8 thread fits 10\/22 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 21 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169347998028,"sku":"KEMT135221","price":11.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/277c7a9d5a36cc1a07ed5ca54f52ec8125bd9ab3_bbba39fa-c7b8-4b6e-9f66-57cd56b1d3c9.jpg?v=1784613912"},{"product_id":"clevis-pin-10mm-dia-40mm-cent-m10","title":"Clevis and pin, 10 mm diameter, 40 mm centre, M10 thread","description":"\u003cp\u003eClevis with pin, 10 mm diameter, 40 mm centre distance and M10 thread.\u003c\/p\u003e\u003cp\u003eIt screws onto the gas spring rod and joins the assembly to the bracket through the pin supplied. Unlike an eyelet, the joint comes apart: pull the pin and the spring comes off without removing the bracket.\u003c\/p\u003e\u003cp\u003eThe 10 mm pin has to pass through the hole in your bracket, and the M10 thread is the rod thread, belonging to the 14\/28 series. The 40 mm centre distance sets how far the pivot sits from the rod end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 40 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348030796,"sku":"KCL1040M10","price":10.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/5b8cb23a24235be2eea4d7c67ab7de6f2d2bc5c1_33d13fd0-88ef-4d20-94b8-81b62501e1ff.jpg?v=1784613912"},{"product_id":"shoe-bracket-8mm-dia-75x9x20mm-centres","title":"Shoe-type bracket, 8 mm hole, 75 × 9 × 20 mm centres","description":"\u003cp\u003eShoe-type bracket with a 8 mm hole.\u003c\/p\u003e\u003cp\u003eIt is the fixed point of the assembly: it bolts to the chassis, frame or cabinet and receives the end of the gas spring, which pivots on it as the lid opens.\u003c\/p\u003e\u003cp\u003eCheck the dimensions and fixing points against your mounting before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHole:\u003c\/strong\u003e 8 mm\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348260172,"sku":"KBI031","price":11.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/6c627e7aba6fd7e200d090374d1315e78fd388d3_f33bcd45-37b4-462d-a852-a299c20164b3.jpg?v=1784613915"},{"product_id":"plas-eye-6mm-dia-28mm-cent-10mm-thk-m6","title":"Plastic eyelet M6, 6\/28\/10 mm","description":"\u003cp\u003ePlastic eyelet with a 6 mm bore, 28 mm centre distance, 10 mm thickness and M6 thread.\u003c\/p\u003e\u003cp\u003eIt is the end fitting that closes the gas spring rod and joins it to the bracket through a pin. In plastic it weighs less and will not mark the bracket, at the cost of taking less load than a metal one.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match: the 6 mm bore sets the pin, the 28 mm to centre places the pivot and the 10 mm thickness must fit the clevis. The M6 thread belongs to the 6\/15 and 8\/18 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 6 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 28 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6 · \u003cstrong\u003eMaterial:\u003c\/strong\u003e plastic\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348292940,"sku":"KEPLSE1AM6","price":3.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/b00864c9f7b404bd4b676093c7de5f5854a04df3.jpg?v=1784613915"},{"product_id":"stud-rod-end-30mm-cent-6mm-dia-m10","title":"Stud rod end, 6 mm, 30 mm centre, M10 thread","description":"\u003cp\u003eRod end with a 6 mm stud, 30 mm centre distance and M10 thread.\u003c\/p\u003e\u003cp\u003eIt closes the end of the gas spring and offers a 6 mm stud for a ball cup to clip onto. This is the rigid option: the articulation comes from the cup, not the end fitting.\u003c\/p\u003e\u003cp\u003eMatch the cup by the 6 mm stud diameter. The M10 thread is the rod thread and belongs to the 14\/28 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStud:\u003c\/strong\u003e 6 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348325708,"sku":"KSRBLM10","price":80.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/259b3c11697fb383f48ed524f25d7725b03f4ed9_cb505dd0-1cc8-4ebf-a11b-27e53856730f.webp?v=1784613915"},{"product_id":"stud-rod-end-30mm-cent-6mm-dia-m8","title":"Stud rod end, 6 mm, 30 mm centre, M8 thread","description":"\u003cp\u003eRod end with a 6 mm stud, 30 mm centre distance and M8 thread.\u003c\/p\u003e\u003cp\u003eIt closes the end of the gas spring and offers a 6 mm stud for a ball cup to clip onto. This is the rigid option: the articulation comes from the cup, not the end fitting.\u003c\/p\u003e\u003cp\u003eMatch the cup by the 6 mm stud diameter. The M8 thread is the rod thread and belongs to the 10\/22 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStud:\u003c\/strong\u003e 6 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348391244,"sku":"KSRBLM08","price":22.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/259b3c11697fb383f48ed524f25d7725b03f4ed9_31c98a94-e80b-440e-b269-152e3ea21116.webp?v=1784613916"},{"product_id":"stud-rod-end-30mm-cent-6mm-dia-m6","title":"Stud rod end, 6 mm, 30 mm centre, M6 thread","description":"\u003cp\u003eRod end with a 6 mm stud, 30 mm centre distance and M6 thread.\u003c\/p\u003e\u003cp\u003eIt closes the end of the gas spring and offers a 6 mm stud for a ball cup to clip onto. This is the rigid option: the articulation comes from the cup, not the end fitting.\u003c\/p\u003e\u003cp\u003eMatch the cup by the 6 mm stud diameter. The M6 thread is the rod thread and belongs to the 6\/15 and 8\/18 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStud:\u003c\/strong\u003e 6 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348424012,"sku":"KSRBLM06","price":21.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/259b3c11697fb383f48ed524f25d7725b03f4ed9_cb505dd0-1cc8-4ebf-a11b-27e53856730f.jpg?v=1784613917"},{"product_id":"spherical-rod-end-8mm-dia-36mm-cent-m10","title":"Spherical rod end, 8 mm, 36 mm centre, M10 thread","description":"\u003cp\u003eRod end with a 8 mm ball joint, 36 mm centre distance and M10 thread.\u003c\/p\u003e\u003cp\u003eIt closes the end of the spring and articulates on its own: the ball turns inside the fitting itself, with no separate cup or stud.\u003c\/p\u003e\u003cp\u003eIt is the one-piece option when the bracket already has its anchor point. The M10 thread is the rod thread and belongs to the 14\/28 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 36 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348456780,"sku":"KSPHS10","price":19.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/1879c4fdce9b1d3c413fadbd2582893946e16d38_f759e506-e822-4657-91bb-269f6a16d060.webp?v=1784613917"},{"product_id":"spherical-rod-end-8mm-dia-36mm-cent-m8","title":"Spherical rod end, 8 mm, 36 mm centre, M8 thread","description":"\u003cp\u003eRod end with a 8 mm ball joint, 36 mm centre distance and M8 thread.\u003c\/p\u003e\u003cp\u003eIt closes the end of the spring and articulates on its own: the ball turns inside the fitting itself, with no separate cup or stud.\u003c\/p\u003e\u003cp\u003eIt is the one-piece option when the bracket already has its anchor point. The M8 thread is the rod thread and belongs to the 10\/22 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 36 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348489548,"sku":"KSPHS08","price":12.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/1879c4fdce9b1d3c413fadbd2582893946e16d38_d553366d-c3b1-41d1-b428-db915b795ae4.webp?v=1784613918"},{"product_id":"spherical-rod-end-6mm-dia-30mm-cent-m6","title":"Spherical rod end, 6 mm, 30 mm centre, M6 thread","description":"\u003cp\u003eRod end with a 6 mm ball joint, 30 mm centre distance and M6 thread.\u003c\/p\u003e\u003cp\u003eIt closes the end of the spring and articulates on its own: the ball turns inside the fitting itself, with no separate cup or stud.\u003c\/p\u003e\u003cp\u003eIt is the one-piece option when the bracket already has its anchor point. The M6 thread is the rod thread and belongs to the 6\/15 and 8\/18 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e 6 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348522316,"sku":"KSPHS06","price":9.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/1879c4fdce9b1d3c413fadbd2582893946e16d38.jpg?v=1784613918"},{"product_id":"rivet-pin-with-bush","title":"Riveted Pin with Bush","description":"\u003cp\u003eRiveted pin with bush, for fixed guided joints.\u003c\/p\u003e\u003cp\u003eUnlike a clip pin, this one is riveted: the joint is permanent and cannot be taken apart without destroying it, in exchange for never working loose through vibration.\u003c\/p\u003e\u003cp\u003eThe bush guides the joint and spreads the friction at the pivot. Check the bracket thickness before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFixing:\u003c\/strong\u003e riveted · \u003cstrong\u003eIncludes:\u003c\/strong\u003e bush\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348587852,"sku":"KRVPIN","price":3.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/KRVPIN_aa7982b7-c2ad-4ded-b663-9c9b016a10a8.jpg?v=1784613919"},{"product_id":"rigid-locking-strut-release-head-m10xm10","title":"M10 release head for rigid locking springs","description":"\u003cp\u003eRelease head for rigid locking gas springs, with an M10 thread at both ends.\u003c\/p\u003e\u003cp\u003eA rigid locking spring stays put wherever you release it, and needs this head to free it: operating it opens the valve and the rod moves again.\u003c\/p\u003e\u003cp\u003eIt screws onto the end of the spring, between the cylinder and the end fitting. Check that your spring has an M10 thread; without the matching head, the lock cannot be released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e M10 × M10 · \u003cstrong\u003ePart number:\u003c\/strong\u003e KRLRH\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348620620,"sku":"KRLRH","price":10.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/81bd7d2aeb0b6a79ce402ff695f0b5a31b11c646.jpg?v=1784613919"},{"product_id":"10mm-pls-cup-s-s-clip-18mm-cent-m6","title":"Plastic ball cup, 10 mm ball, 18 mm centre, M6 thread, stainless steel clip","description":"\u003cp\u003ePlastic ball cup for a 10 mm ball, 18 mm centre distance and M6 thread with a stainless steel retaining clip.\u003c\/p\u003e\u003cp\u003eIt is the articulated end fitting of the gas spring: it clips onto a ball stud of the same diameter and lets the assembly pivot as the lid or tailgate opens.\u003c\/p\u003e\u003cp\u003eTwo dimensions have to match. The 10 mm ball diameter must be the same as the stud it mounts on, or the cup will not clip on. The M6 thread goes onto the gas spring rod and belongs to the 6\/15 and 8\/18 series. The 18 mm centre distance sets how far the pivot sits from the rod end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348653388,"sku":"KBCPS10-18M6","price":2.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/5c05d74f6dbef59c20e15981e8e9ed94c9872c59.jpg?v=1784613919"},{"product_id":"10mm-pls-cup-round-18mm-cent-m6-p5tb","title":"Plastic round ball cup, 10 mm ball, 18 mm centre, M6 thread","description":"\u003cp\u003ePlastic ball cup for a 10 mm ball, 18 mm centre distance and M6 thread.\u003c\/p\u003e\u003cp\u003eIt is the articulated end fitting of the gas spring: it clips onto a ball stud of the same diameter and lets the assembly pivot as the lid or tailgate opens.\u003c\/p\u003e\u003cp\u003eTwo dimensions have to match. The 10 mm ball diameter must be the same as the stud it mounts on, or the cup will not clip on. The M6 thread goes onto the gas spring rod and belongs to the 6\/15 and 8\/18 series. The 18 mm centre distance sets how far the pivot sits from the rod end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348686156,"sku":"KBCP10-18RM6","price":6.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/2c47ec38cbc5d88b2bbf4afbf56edb64d8885bac.jpg?v=1784613920"},{"product_id":"10mm-p-flared-cup-18mm-cent-m6x1-pls-22","title":"Plastic flared ball cup, 10 mm ball, 18 mm centre, M6 × 1 thread","description":"\u003cp\u003ePlastic ball cup for a 10 mm ball, 18 mm centre distance and M6 × 1 thread.\u003c\/p\u003e\u003cp\u003eIt is the articulated end fitting of the gas spring: it clips onto a ball stud of the same diameter and lets the assembly pivot as the lid or tailgate opens.\u003c\/p\u003e\u003cp\u003eTwo dimensions have to match. The 10 mm ball diameter must be the same as the stud it mounts on, or the cup will not clip on. The M6 × 1 thread goes onto the gas spring rod and belongs to the 6\/15 and 8\/18 series. The 18 mm centre distance sets how far the pivot sits from the rod end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6 × 1\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348718924,"sku":"KBCP10-18FM6","price":4.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/44a55454b038fb39af5f5aeb2630e3a83332da1b.jpg?v=1784613921"},{"product_id":"eyelet-t-10mm-dia-25mm-cent-18mm-wd-m8","title":"T-eyelet, 10 mm diameter, 25 mm centre, 18 mm wide, M8 thread","description":"\u003cp\u003eT-type eyelet with a 10 mm bore, 25 mm centre distance, 18 mm width and M8 thread. The T body spreads the load over a wider base than a flat eyelet, which helps when the anchor works sideways or the bracket has no closed clevis.\u003c\/p\u003e\u003cp\u003eCheck the three dimensions against your mounting: the 10 mm bore sets the pin diameter; the 25 mm to centre sets how far the pivot sits from the rod end; and the 18 mm width has to fit the bracket housing.\u003c\/p\u003e\u003cp\u003eThe M8 thread fits 10\/22 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e T · \u003cstrong\u003eBore:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 25 mm · \u003cstrong\u003eWidth:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348751692,"sku":"KEMT510M8","price":3.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/9a66257cfba5171163aa4170098cabfd47550938.jpg?v=1784613921"},{"product_id":"eyelet-t-10mm-dia-25mm-cent-18mm-wd-m10","title":"T-eyelet, 10 mm diameter, 25 mm centre, 18 mm wide, M10 thread","description":"\u003cp\u003eT-type eyelet with a 10 mm bore, 25 mm centre distance, 18 mm width and M10 thread. The T body spreads the load over a wider base than a flat eyelet, which helps when the anchor works sideways or the bracket has no closed clevis.\u003c\/p\u003e\u003cp\u003eCheck the three dimensions against your mounting: the 10 mm bore sets the pin diameter; the 25 mm to centre sets how far the pivot sits from the rod end; and the 18 mm width has to fit the bracket housing.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e T · \u003cstrong\u003eBore:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 25 mm · \u003cstrong\u003eWidth:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348784460,"sku":"KEMT510M10","price":7.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/751f71a21e7f6e5580905657d3518207a3666cd2.jpg?v=1784613922"},{"product_id":"eyelet-8mm-dia-35mm-cent-10mm-thk-m8","title":"Eyelet, 8 mm diameter, 35 mm centre, 10 mm thick, M8 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 35 mm centre distance, 10 mm thickness and M8 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 35 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M8 thread fits 10\/22 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 35 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348817228,"sku":"KEMT831","price":3.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/22b290e6f05cbdcead2b7bbcbea7cf38064587b5.jpg?v=1784613922"},{"product_id":"eyelet-8mm-dia-35mm-cent-10mm-thk-m10","title":"Eyelet, 8 mm diameter, 35 mm centre, 10 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 35 mm centre distance, 10 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 35 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 35 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348849996,"sku":"KEMT1351","price":6.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/cd5c262de9e6e755aee409a4f766f0864ec4f0df.jpg?v=1784613923"},{"product_id":"eyelet-8mm-dia-30mm-cent-10mm-thk-m10","title":"Eyelet, 8 mm diameter, 30 mm centre, 10 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 30 mm centre distance, 10 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 30 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 30 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169348948300,"sku":"KEMT135221D8E30","price":5.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/cf288828b348ecc5903db0e18cb63d67c60c3774.jpg?v=1784613923"},{"product_id":"eyelet-8mm-dia-25mm-cent-10mm-thk-m8","title":"Eyelet, 8 mm diameter, 25 mm centre, 10 mm thick, M8 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 25 mm centre distance, 10 mm thickness and M8 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 25 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M8 thread fits 10\/22 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 25 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349013836,"sku":"KEMT081025M8","price":5.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/94f2ee45f395f61969d212e2f16b19036fd643fa.jpg?v=1784613923"},{"product_id":"eyelet-8mm-dia-25mm-cent-10mm-thk-m10","title":"Eyelet, 8 mm diameter, 25 mm centre, 10 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 25 mm centre distance, 10 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 25 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 25 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349046604,"sku":"KEMT081025M10","price":6.96,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/802f3895d8bbff5b5fe898809f9d89c86d7bf058.jpg?v=1784613924"},{"product_id":"eyelet-8mm-dia-21mm-cent-10mm-thk-m8","title":"Eyelet, 8 mm diameter, 21 mm centre, 10 mm thick, M8 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 21 mm centre distance, 10 mm thickness and M8 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 21 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M8 thread fits 10\/22 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 21 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349079372,"sku":"KEMT829E21","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/7c66c285e48a495040b7255a6745e4f2b8c9a6fc.jpg?v=1784613925"},{"product_id":"eyelet-8mm-dia-21mm-cent-10mm-thk-m10","title":"Eyelet, 8 mm diameter, 21 mm centre, 10 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 21 mm centre distance, 10 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 21 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 21 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349112140,"sku":"KEMT135221D8","price":5.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/3919ffc5d344fc48026b0c0f33fa9c59540d42dc.jpg?v=1784613925"},{"product_id":"eyelet-8mm-dia-18mm-cent-10mm-thk-m6","title":"Eyelet, 8 mm diameter, 18 mm centre, 10 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 8 mm bore, 18 mm centre distance, 10 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8 mm bore sets the pin diameter; the 18 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349144908,"sku":"KEMT068D8","price":3.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/d422c5a35bca401c3eec12aa09ee84977407d033.jpg?v=1784613926"},{"product_id":"eyelet-8-1mm-dia-27mm-cent-12mm-thk-m10","title":"Eyelet, 8.1 mm diameter, 27 mm centre, 12 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 8.1 mm bore, 27 mm centre distance, 12 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8.1 mm bore sets the pin diameter; the 27 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 12 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 27 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 12 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349177676,"sku":"KEMT2Z8","price":4.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/7169fadbbae295499fde9c696d00a368019196ee.jpg?v=1784613926"},{"product_id":"eyelet-8-1mm-dia-22mm-cent-12mm-thk-m10","title":"Eyelet, 8.1 mm diameter, 22 mm centre, 12 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 8.1 mm bore, 22 mm centre distance, 12 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8.1 mm bore sets the pin diameter; the 22 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 12 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 22 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 12 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349538124,"sku":"KEMT22","price":4.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/aa1ef3d0c2d325babb91d2a37681945b63156600.jpg?v=1784613926"},{"product_id":"eyelet-8-1mm-dia-18mm-cent-10mm-thk-m6","title":"Eyelet, 8.1 mm diameter, 18 mm centre, 10 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 8.1 mm bore, 18 mm centre distance, 10 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 8.1 mm bore sets the pin diameter; the 18 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 8.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349570892,"sku":"KEMT8Z02","price":6.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/77cef4d607528f2d641626f4d4037badd4063287.jpg?v=1784613927"},{"product_id":"eyelet-6mm-dia-18mm-cent-10mm-thk-m6","title":"Eyelet, 6 mm diameter, 18 mm centre, 10 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 6 mm bore, 18 mm centre distance, 10 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 6 mm bore sets the pin diameter; the 18 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 6 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349603660,"sku":"KEMT068M6","price":4.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/039913d470a58db2db413d8b77327409ff7b74dc_a6d60c72-ba29-445c-89e5-3e4e09651d01.jpg?v=1784613927"},{"product_id":"eyelet-6-1mm-dia-18mm-cent-3mm-thk-m6","title":"Eyelet, 6.1 mm diameter, 18 mm centre, 3 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 6.1 mm bore, 18 mm centre distance, 3 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 6.1 mm bore sets the pin diameter; the 18 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 3 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 6.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 3 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349669196,"sku":"KEMT1X4","price":8.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/10f0187a8a6f5b7adb44585ea275661857bcf8fe.jpg?v=1784613928"},{"product_id":"eyelet-6-1mm-dia-18mm-cent-10mm-thk-m6","title":"Eyelet, 6.1 mm diameter, 18 mm centre, 10 mm thick, M6 thread","description":"\u003cp\u003eEyelet with a 6.1 mm bore, 18 mm centre distance, 10 mm thickness and M6 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 6.1 mm bore sets the pin diameter; the 18 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M6 thread fits 6\/15 and 8\/18 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 6.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 18 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349734732,"sku":"KEMT8Z01","price":3.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/a84ecd123e13b19df559892b2479fcd7712b959c.jpg?v=1784613928"},{"product_id":"eyelet-10mm-dia-35mm-cent-10mm-thk-m8","title":"Eyelet, 10 mm diameter, 35 mm centre, 10 mm thick, M8 thread","description":"\u003cp\u003eEyelet with a 10 mm bore, 35 mm centre distance, 10 mm thickness and M8 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 10 mm bore sets the pin diameter; the 35 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M8 thread fits 10\/22 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 35 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349767500,"sku":"KEMT1358","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/1fffd6a382da632073cdaad2f302defe2a82aa78.jpg?v=1784613929"},{"product_id":"eyelet-10mm-dia-35mm-cent-10mm-thk-m10","title":"Eyelet, 10 mm diameter, 35 mm centre, 10 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 10 mm bore, 35 mm centre distance, 10 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 10 mm bore sets the pin diameter; the 35 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 10 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 35 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349800268,"sku":"KEMT135","price":5.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/14bf20228237ff246ae964d076da709b348f2d88.jpg?v=1784613929"},{"product_id":"eyelet-10-1mm-dia-27mm-cent-12mm-thk-m10","title":"Eyelet, 10.1 mm diameter, 27 mm centre, 12 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 10.1 mm bore, 27 mm centre distance, 12 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 10.1 mm bore sets the pin diameter; the 27 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 12 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 10.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 27 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 12 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349833036,"sku":"KEMT2Z10","price":6.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/def07695b26eab1e76b08e1755bd805294c3c89d.jpg?v=1784613930"},{"product_id":"eyelet-10-1mm-dia-22mm-cent-12mm-thk-m10","title":"Eyelet, 10.1 mm diameter, 22 mm centre, 12 mm thick, M10 thread","description":"\u003cp\u003eEyelet with a 10.1 mm bore, 22 mm centre distance, 12 mm thickness and M10 thread. It is the end fitting that closes the gas spring rod and joins it to the bracket through a pin or bolt.\u003c\/p\u003e\u003cp\u003eAll three dimensions have to match your mounting: the 10.1 mm bore sets the pin diameter; the 22 mm to centre sets how far the pivot sits from the rod end, and with it the overall assembled length; and the 12 mm thickness must fit inside the clevis or between the bracket ears.\u003c\/p\u003e\u003cp\u003eThe M10 thread fits 14\/28 series gas springs. Check the thread on your rod before ordering: it is the one figure that cannot be adapted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 10.1 mm · \u003cstrong\u003eCentre:\u003c\/strong\u003e 22 mm · \u003cstrong\u003eThickness:\u003c\/strong\u003e 12 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349865804,"sku":"KEMT1Z7","price":5.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/20bfc9f364f04f456902ac09a33a7bb867562de3.jpg?v=1784613930"},{"product_id":"extension-8mm-dia-10mm-long-m6","title":"Rod extension, 8 mm diameter, 10 mm length, M6 × 1 thread","description":"\u003cp\u003eRod extension, 8 mm diameter, adding 10 mm of length to the assembly, with M6 × 1 thread.\u003c\/p\u003e\u003cp\u003eIt screws in between the gas spring rod and its end fitting to move the anchor point without replacing the spring. This is the part to reach for when the spring gives the right force but falls short on usable stroke, or when the target bracket has ended up offset from the intended mounting.\u003c\/p\u003e\u003cp\u003eBy diameter and thread it belongs to the 8\/18 gas spring series. Before ordering, check three things on your spring: 8 mm rod diameter, M6 × 1 thread, and that the extra 10 mm fit in the mounting gap with the spring compressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 8 mm · \u003cstrong\u003eAdded length:\u003c\/strong\u003e 10 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M6 × 1 · \u003cstrong\u003eSeries:\u003c\/strong\u003e 8\/18\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349931340,"sku":"EXT0810M6","price":4.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/817852694bca15ee380d43500279dd41cc27aef3_abf49023-497e-4f9c-9add-0dfc3daccf84.jpg?v=1784613931"},{"product_id":"extension-14mm-dia-20mm-long-m10","title":"Rod extension, 14 mm diameter, 20 mm length, M10 × 1.5 thread","description":"\u003cp\u003eRod extension, 14 mm diameter, adding 20 mm of length to the assembly, with M10 × 1.5 thread.\u003c\/p\u003e\u003cp\u003eIt screws in between the gas spring rod and its end fitting to move the anchor point without replacing the spring. This is the part to reach for when the spring gives the right force but falls short on usable stroke, or when the target bracket has ended up offset from the intended mounting.\u003c\/p\u003e\u003cp\u003eBy diameter and thread it belongs to the 14\/28 gas spring series. Before ordering, check three things on your spring: 14 mm rod diameter, M10 × 1.5 thread, and that the extra 20 mm fit in the mounting gap with the spring compressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 14 mm · \u003cstrong\u003eAdded length:\u003c\/strong\u003e 20 mm · \u003cstrong\u003eThread:\u003c\/strong\u003e M10 × 1.5 · \u003cstrong\u003eSeries:\u003c\/strong\u003e 14\/28\u003c\/p\u003e","brand":"Gassprings EU","offers":[{"title":"Default Title","offer_id":58169349964108,"sku":"EXT1420M10","price":6.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/files\/42adc4ab5d49ff673c131208d0e3f6c4cf39185e_c380d52f-43fc-46d9-8caa-44bd83d34eb4.jpg?v=1784613931"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/7112\/3788\/collections\/c0a2a72b3410802e1c6091d3e2c7c2b36e30d821_626568ad-b9df-4c16-8893-87e90c6840cb.jpg?v=1786704026","url":"https:\/\/mcnaughtans.es\/en\/collections\/accesorios-para-resortes-de-gas.oembed?page=6","provider":"McNaughtans","version":"1.0","type":"link"}